Dies ist eine alte Version des Dokuments!
Powerpack Train-o-Matic
Ein sehr gutes und preiswertes PowerPack bietet Train-o-Matic.
Der Anschluss an einen ESU-Decoder erfolgt wie der Anschluss des ESU-Powerpacks.
Train-O-Matic CV settings
ANALOG MODE OFF
CV 29 = 10 (analog mode off, as the powerpack doesn’t work with analog mode on)
TIME OUT
CV 123 = time that the powerpack will give the extra power. Default value is set to 16, which is 0.25 seconds. Value 255 is 4 seconds.
START UP DELAY
CV 124* = Start up delay. Value in seconds. Default is set to 10, so SPP will be activated after 10 seconds. This is useful when you have more trains with a powerpack and they don’t all start grabbing power the moment the system is turned on. *Note: Before firmware 233 the start up delay was set with CV 152. Check the SPP manual to find out how to read the firmware version.
ESU CV settings
ESU v4 and v5 decoders have the three terminal points on the chip to connect to the Train-O-Matic Smart Power Pack.
TIME OUT
CV 113 In ESU terminology this is called “Power fail bypass” or “bypass time”. The standard value is 50. The maximum value of CV113 is 255.